A multifunction vibrator can list suction, swinging, telescopic motion and vibration on the same page. Those words describe different features, so a longer function list alone will not tell you which design to choose. The useful comparison is where the feature sits, which controls operate it and what the product requires for power.

Here, we compare three OMIREA models: MR6T83 pairs a suction nozzle with a vibrating arm; WS9C72 adds swinging shaft movement to a dual-arm vibration design; WS3R86 combines telescopic movement, vibration and a side-arm suction opening. Start with the function you want, then check how the exact model lets you control it.

What the three motion labels mean

  • Suction: a function associated with a dedicated nozzle or opening. MR6T83 has a suction nozzle; WS3R86 has an opening on its shorter side arm. This is different from a suction-cup base used to attach a product to a surface.
  • Swinging: movement of the main shaft in a swinging action. The WS9C72 artwork illustrates a back-and-forth sweep, and its listing gives five swinging settings.
  • Telescopic: extension-and-retraction movement of the shaft, illustrated by straight movement arrows on WS3R86. Its listing includes vibration and a separate side-arm suction feature as well.

Vibration is a further listed function in all three models. These names identify the advertised actions, rather than a guaranteed sensation. A suction label alone also does not establish a particular air-pulse technology or pressure specification.

The three-model comparison

ModelListed functionsDocumented controlsPower
Mira MR6T8310 suction settings; 10 vibration settingsSeparate suction and vibration buttonsUSB rechargeable through a built-in port
Whisper WS9C725 swinging settings; 10 vibration modes; main-shaft and side-arm vibrationSeparate vibration buttons; central power/swing buttonMagnetic USB charging; about 2.5 hours to charge and 45 minutes of use, as listed
Whisper WS3R86Telescopic shaft movement, vibration and side-arm suction3 handle buttons; assignments not specifiedNot specified in the current product information

The figures above are listing specifications. Mode counts describe available settings; they do not give a common measure of intensity across different functions or models.

If your priority is suction with separate controls: MR6T83

The Mira MR6T83 makes its two-function arrangement relatively clear: a suction nozzle sits beside a curved vibrating arm, with separate buttons for suction and vibration. The listing specifies ten settings for each function. This is the model to look at first if choosing suction and vibration independently is central to your shortlist.

Its listed construction is a silicone exterior with ABS components, and it recharges through a built-in USB charging port. The current listing shows Purple. This combination gives you a documented material description, a charging arrangement and separate function controls to compare before buying.

Original Purple MR6T83 charging illustration showing a cable plug beside its built-in charging port.
MR6T83’s original charging-port illustration. The listing specifies USB rechargeability; the pictured connector does not establish compatibility with other charging cables.

If your priority is swinging movement: WS9C72

The Whisper WS9C72 is the swinging option among these three. The listing specifies five shaft-swinging settings and ten vibration modes, with dedicated vibration motors in the main shaft and shorter side arm.

The control diagram gives a useful map: the upper button controls main-shaft vibration, the middle button is labeled for power and swing, and the lower button controls side-arm vibration. Separate vibration adjustment is documented. The exact press or hold sequence still needs the operating instructions.

Red WS9C72 supplier diagram showing three labeled handle buttons and approximate 245 mm, 36 mm and 137 mm size markings.
WS9C72’s original diagram maps the upper, middle and lower buttons to main-shaft vibration, power/swing and side-arm vibration. The dimensions are supplier markings; the 137 mm span is not labeled insertable length.

WS9C72 also provides the clearest charging-time information in this comparison: magnetic USB charging, approximately 2.5 hours to charge and around 45 minutes of use per charge. These are supplier figures, without stated test conditions. The listed finish is Red.

If your priority is telescopic movement plus a suction feature: WS3R86

The Whisper WS3R86 is the telescopic option here. Its documented design combines shaft movement, vibration and a dedicated suction opening on the shorter side arm. The curved tip, raised ridges and gold-tone accents distinguish its Pink profile.

Three buttons are visible on the handle, but their individual functions are not specified. If independent control of every function is a requirement for you, get that answer before choosing this model. The presence of three buttons does not establish three independently adjustable functions.

Pink WS3R86 supplier illustration with straight movement arrows beside the shaft and graphics at the tip and side-arm suction opening.
WS3R86’s original illustration identifies telescopic movement, vibration and the side-arm suction feature. Arrows and other effects are illustrative, rather than measurements of movement or performance.

The details to settle before you order

A feature shortlist becomes a useful buying decision when the remaining specifications match your requirements. These are the main gaps in the available information:

  • MR6T83: charge time and runtime are not specified. Its original size graphics give differing measurements, so ask for confirmed dimensions if size is a deciding factor.
  • WS9C72: construction material and the shaft’s swing angle or travel are not specified. The listing’s ten vibration modes should not be read as ten settings independently available at each motor, or as a count of possible combinations.
  • WS3R86: power arrangement, material, mode counts, telescopic travel distance and button assignments are not specified. Its dimension diagram shows a Purple sample although the listed purchase option is Pink.

For a moving-shaft design, overall length and movement distance answer different questions. WS9C72’s diagram marks 245 mm overall height; WS3R86’s marks 222.1 mm on the Purple sample. These supplier markings do not establish insertable length or the distance the shaft moves. Our size-comparison guide explains how to separate those measurements.

For all three, confirm the exact operating and stopping instructions, permitted cleaning method, and charging accessories where applicable. The available information does not establish a shared water-resistance standard or simultaneous operation of every listed function. Ask about any feature you would otherwise have to assume.

Choose the function, then the control layout

Choose MR6T83 as your starting point for suction and vibration with documented separate controls. Compare WS9C72 when swinging movement is the feature you want, especially if a labeled button map and stated charging times matter. Consider WS3R86 when telescopic movement and side-arm suction are your priorities, once you have clarified its power and control details.

If you are still deciding on the overall shape of device, our vibrator-types guide gives the broader category comparison. For these three models, the next step is to open the exact product page and confirm the specifications that matter to you.

Sources and scope

This is a comparison of OMIREA’s published product information and original supplier illustrations, checked on October 7, 2026. It is not a hands-on review, a performance ranking or an independent engineering test. Descriptions of movement explain the listed functions; illustrations do not establish internal mechanics, measured force or a particular experience.